BH-25 Ball Head

A RRS ball head is the best choice for all general photography, and will give you fast and accurate control and solid support of your camera or lens. Aiming and horizon leveling can be accomplished as one instinctive motion, and rigid lockup takes just a quick twist of one control. As a result, our ball heads are faster to use and inherently more stable than 3-axis pan-tilt tripod heads. Since the ball head profile is smaller and lacks the protruding handles, they are also much easier to carry and pack. These are no-nonsense heads with robust capacity, offering minimal weight and elegant simplicity. They excel as ground-level macro tools, but also as super light heads for backpacking, travel, and table top use. The T-lever on the BH-25 is longer on one end to help you lock the ball down solidly. It is spring loaded; simply pull it out to reposition the lever to allow it to clear wider tripod platforms. The BH-25 ball head has a beefy T-lever to lock ball articulation and the panning base.

• 1/4-inch tapped stem 
• 25mm diameter ball is hollow 
• Single drop notch 
• Knob and lever are captive and uniquely shaped 
• Spring-loaded lock knob can be repositioned
• Standard operation screw-knob style quick-release clamp

BH-25 LR

Specs

Country of Origin: USA

• • Load Capacity: 8.8lbs / 4 kg
  • Height: 2.6" / 66 mm
  • Base Diameter: 1.3" / 34 mm
  • Ball Diameter: 1 " / 25 mm
  • Tripod Mount: 3/8"-16
  • Weight: 7.8oz / 221 g

In The Box

• • (1) BH-25 Ball head
  • (1) B2-40 LR lever release style quick-release clamp
  • (1) 5/32" hex key tool (required to remove/replace clamp)
  • (1) User's Guides for Ball head and Clamp features
  • (1) ¼"-20 x 3/4" stainless steel flat head mounting screw

BH-25 Pro

Specs

Country of Origin: USA

• • Load Capacity: 8.8lbs / 4 kg
  • Height: 2.6" / 66 mm
  • Base Diameter: 1.3" / 34 mm
  • Ball Diameter: 1 " / 25 mm
  • Tripod Mount: 3/8"-16
  • Weight: 6.5oz / 185 g

In The Box

• • (1) BH-25 Ball head
  • (1) B2-mAS screw knob style quick release clamp
  • (1) 5/32" hex key tool (required to remove/replace clamp)
  • (1) User's Guides for Ball head and Clamp features
  • (1) ¼"-20 x 3/4" stainless steel flat head mounting screw

BH-25 (no clamp)

Specs

Country of Origin: USA

• • Load Capacity: 8.8lbs / 4 kg
  • Height: 1.9" / 69 mm
  • Base Diameter: 1.3" / 34 mm
  • Ball Diameter: 1 " / 25 mm
  • Tripod Mount: 3/8"-16
  • Weight: 4.1oz / 148 g

In The Box

• • (1) BH-25 Ball head
  • (1) 5/32" hex key tool (required to remove/replace clamp)
  • (1) User's Guides for Ballhead and Clamp features
  • (1) ¼"-20 x 3/4" stainless steel flat head mounting screw