Versa® SureGrip® Series 3 Center Column

SKU:
TA-3-QC
UPC:
818413020016
$145.00
Adding to cart… The item has been added
Product Details

Series 3 Center Column

Enhance your shooting experience with the Versa Series Quick-Column, which eliminates the need for manual adjustments to tripod legs by offering seamless, variable height control. The quick-column grants an expansive reach of up to 12.5 inches. Designed to be universally compatible with all Versa Series 3 Tripods, the TA-3-QC helps adventurers and photographers who prioritize minimalism on the go. Experience a more compatible and lighter setup with an effortless detachable ⅛” hex key for versatility and adaptability.

Features

⬩Adjust height seamlessly without modifying tripod legs
⬩Experience up to 12.5 inches of elevation and use in place of tripod platform
⬩Fits all models within the Versa Series 3 Tripod range
⬩Designed for easy detachment and convenient travel

Dimension Measurement
Length 15.1" (384 mm)
Total Travel 12.8" (325 mm)
Weight 11.5 oz (325 g)
Country of Origin Made in USA badge

What's in the box?

(1) TA-3-QC Series 3 Quick Column
(2) 1/4"-20 cup point set screw
(1) 1/8" hex key
(1) User's guide

Reviews

2 Reviews

  • not up to par
    2

    Posted by Eric on 1st Feb 2025

    This is really not built nearly as well as the rest of tripod. The column is not carbon fiber. It should be. Raising and lower this thing is a challenge, you have to yank on it. It doesn't move smoothly or easily up and down at all. The base that screws in on top has no locking nuts to secure it to the column. Save your money.

  • Works Great. Some initial difficulty
    4

    Posted by Wayne on 27th Jun 2024

    Exactly what I needed. These have been out of stock for some time so I signed up to be notified when they would be available again. Very well made and works great. It's everything you'd expect from RRS. However, after installation the center column wouldn't raise! I kept loosening the silver wing-nut more and more and still the column would not raise up. So I completely loosened the wing-nut until it was not longer engaged with the base and removed the column completely leaving just the base still attached to the apex. The silver wing-nut was stuck at the top of the column. Turns out that part of the circular nylon bushing (inside the wing-nut) was bonded to the metal column as if someone had put a tad of superglue to hold it in place. After a little bit of wiggling the wing-nut it finally broke free from the column. I don't know if this was intentional at the factory but there was no mention about the wing-nut being temporary glued to the column in the user guide. At any rate, everything is working fine and it's a great addition to my TVC-33.

Versa® SureGrip® Series 3 Center Column

$145.00
Really Right Stuff
Really Right Stuff

Elevate your vision. 30+ Years Committed to Perfection. Unleash Your Creativity.

Our Story