192 PPP: MPR-192 Rail w/ Two Mini-Clamps

192 PPP — MPR-192 Rail with Two Mini-Clamps

The 192 PPP is a panoramic and nodal-point positioning kit built around the MPR-192 precision rail and two Mini-Clamps. It lets you slide and lock a camera or lens to the correct optical nodal point so stitched panoramas align cleanly with reduced parallax. Use it for single-row and multi-row panoramas, macro stitching, architectural work, and wide-angle landscapes where repeatable alignment matters.

Key features and capabilities

• Twist-free alignment: Mini-Clamps use a tab-in-groove interface for rigid, repeatable 90° positioning.
• Two operating modes: Configure clamps perpendicular for camera plates (non-collared lenses) or parallel for collared lenses.
• Nodal-point sliding: Clamps glide smoothly along the rail to dial in nodal point placement for wide and ultra-wide lenses.
• Repeatable setup: Laser-engraved center marks and dual-side millimeter scales help record and return to known positions.
• Fast leveling: Built-in high-visibility bulls-eye spirit level supports quick panorama leveling and multi-row consistency.
• Safety retention: Dual safety stop screws help prevent accidental slide-out from compatible clamps.

Use the 192 PPP to position camera plates or collared lenses precisely, lock alignment without twist, and repeat nodal settings reliably for stitched panorama workflows.

Compatibility

• Mounting standard: Designed for Arca-type / RRS dovetail plates and compatible clamps.
• Camera setup: Works with camera-mounted plates for non-collared lenses (clamps set perpendicular).
• Lens setup: Works with collared telephoto lenses that have an Arca-type / RRS dovetail lens foot (clamps set parallel).
• Use cases: Single-row panoramas, multi-row panoramas, macro stitching, architectural shooting, and ultra-wide landscape capture.

Included accessories (what’s in the box)

• (1) MPR-192 dovetail rail
• (1) B2-mAS Mini-Clamp
• (1) B2-FAB Mini-Clamp
• (1) MPR-C flange (optional use with MPR-192)
• (1) Flat-head 1/4"-20 × 3/4 screw (installed)
• (4) Cap-head M3-0.5 × 5mm screws (2 installed as safety stops; 2 included for MPR-C flange)
• (2) B107 captive style 1/4"-20 screws (optional use with MPR-192)
• (1) 5/32" hex key
• (1) M2.5 hex key
• (1) QR-Code Reference Card for User Manual

Includes the MPR-192 rail, two Mini-Clamps, optional MPR-C flange hardware, fasteners, hex keys, and a QR reference card.