Our customers begged us to develop a more robust, well-machined and smooth operating monopod head to use with their largest telephoto lenses. Our MH-01 High Capacity Monopod Head is the answer.

Specs

1. Load Capacity: 75lbs / 34kg
2. Height (without clamp): 2.75-inches / 70mm
3. Base Width: 1.5-inches x 2-inches / 38mm x 50mm
4. Mounting socket 3/8"-16 in base. Many monopods have a reversible mounting stud. If your monopod has a 1/4"-20 stud, check to see if you can remove the round platform and flip the stud over to reveal a thicker 3/8" end.
5. Weight: 13.4ounces / 380g
6. Price: $226

• Knob Extension Beyond Base = 1.4-inches/35mm
• Features an RRS-compatible dovetail on foot to add versatility.
• Our B2-Pro II and B2 AS II clamps are easily mounted and oriented either parallel or perpendicular to the tilt. The "+" groove on the bottom of these two clamps nests securely with the bosses on the MH-01.
• The following clamps can also be mounted on MH-01, but can be oriented in only one direction, parallel to the tilt: B2-Pro, B2-Pro/L, B2 LR II, and B2 LLR II.
• Large tilt-lock knob is easy to grip and locks solidly, even when wearing gloves.

Image above shows the Canon 500mm lens mounted with Really Right Stuff replacement foot, LCF-50, on the new MH-01 with B2-Pro II quick-release clamp.

Image above shows our MH-01 head with B2-Pro II clamp mounted in a Wimberley Head II. Now you can mount your camera body with short lenses in your Wimberley head and rotate quickly from landscape to portrait!

Not all clamps are created equal.

Our MH-01 monopod head has one set of mounting bosses on its top surface so that Really Right Stuff quick-release clamps can be mounted securely with a single screw without twisting or shifting. The image below illustrates why some clamps can be mounted on the head in only one orientation.