Flash Accessories

Nikon SC-29 Strobe Cord Adaptor

The footprint of Nikon's SC-29 strobe cord is wider than their standard SC-17 or SC-28 cords. Buy our FA-29 to mount your Nikon SC-29 remote cable to one of our flash brackets. Adaptor alone shown at left, adaptor installed on a B87-B flash bracket shown at right.

Metz Flash Adaptor & Metz-Package

Mount a Metz flash to your Really Right Stuff flash bracket by adding our MPR-Metz adaptor (flash mounts facing left; rotate head head forward). MPR-Metz is compatible with: 70 MZ-5/MZ-4, 60 CT-4/CT-1, and 45 CL-4/CL-1 large hand-grip type flashes. Or mount adaptor to an MPR-1 rail to create a handy Metz flash platform (flash mounts facing forward, on left side of camera). Now mount both camera body and flash unit side by side. Our Metz Mount Package includes one MPR-Metz flash adaptor, one MPR-1 6" rail, one B2 LR II clamp, and one reducer bushing.

FB-A Dovetail Adaptor

If your telephoto lens plate does not incorporate a double dovetail, add our FB-A dovetail adaptor. Not sure if your plate has a double-dovetail? See image at left; a double-dovetail will have mirrored 45° dovetails. The FB-A accessory (shown alone on left & mounted on right) retrofits your existing lens plates to use our flash brackets. Mount the FB-A on any lens plate from Really Right Stuff or Kirk—use both screws for our plates, use single screw for Kirk plates (all Wimberley lens plates already have the double-dovetail design). Use this new dovetail for mounting our flash brackets. Note about Clearance: The FB-A raises the clamping surface for flash brackets by 2⁄10ths of an inch. There must be, at minimum, 5⁄8-inch of clearance from the top surface of the plate to the barrel of the lens.

Nikon SB-R200 Speedlight Adaptor

Use our FA-R200 adaptor to mount your SB-R200 Speedlight Head on any Really Right Stuff flash bracket instead of using the Nikon SX-1 Attachment Ring (this is the ring that comes with R1 & R1C1 Systems). Use the screw in the head of the flash bracket to mount the adaptor, then snap the SB-R200 Speedlight into the adaptor. Do not loosen screws on rear of adaptor; no adjustment of these screws is necessary.

Quantum Qflash Adaptors

Mount any Quantum Qflash unit to Really Right Stuff flash brackets and accessories. Since the bottom of the Qflash units is slightly curved, it's very difficult to mount them to a flat surface. Our Qflash adapters mate perfectly to the curved bottom. And since the adaptors are flat on the bottom with multiple ¼”-20 threaded sockets, they're a great aid for mounting a Qflash onto just about anything. Of course, they're perfect for Really Right Stuff flash brackets.

FA-Q2 for Qflash T4d & T5d/5d-R The FA-Q2 has two ¼”-20 accessory sockets.

FA-Q1 for Qflash all other Qflash units The FA-Q3 has three ¼”-20 accessory sockets.

	B89 Flash Extender Shown on left. This extension column mounts atop our flash brackets to increase the vertical distance by an additional 8.5 inches. This can eliminate "eyeshine" when using a strobe for flash fill on wildlife. Also handy to eliminate redeye when shooting nighttime football. FA-EX1 Telescoping Extender Shown on right. This is a rigid, but lightweight, telescoping extension column that mounts atop our flash brackets to increase the vertical distance between the strobe head and the lens by an additional 3.8 to 6.14 inches. Or, tilt the flash head downward, and the B89 can extend a strobe farther forward for interesting backlighting for macro work
Joe is shown here handholding a dual-strobe macro setup. Equipment being used: Canon 1Ds MkII with 180mm/f3.5 macro lens mounted on MPR-1 rail. B85-B flash bracket with two B85-FM flash mounts fitted with two FA-EX1 extensions & one B89 for Canon MT-24EX macro twin lite.

Really Right Stuff Series-B Flash Brackets B85-B (smallest), B87-B, and B91-B (largest)

Spare Flash Mounts

Now a dual strobe set-up is easy! Just add a spare flash mount to your flash bracket. These spare flash mounts slide directly on the end of the flash bracket, and can be positioned anywhere along the flash hoop. Note that Flash Mounts are model specific:

• B85-B flash bracket uses B85-FM
• B87-B flash bracket uses B87-FM
• B91-B flash bracket uses B91-FM
• 

Cold Shoe Mounts

These insulated cold shoe mounts allow you to mount hotshoe strobes directly into Really Right Stuff flash brackets, flash accessories, or quick-release clamps. Need to mount a second strobe to our flash brackets? Just add our FA-CS2. Want to put use your lightweight tripod as a light stand? Use our FA-CS3. Both of these cold shoe units are insulated and securely hold any hotshoe strobe.

FA-CS2 For mounting hotshoe strobes to RRS flash brackets & accessories.	FA-CS3 For mounting hotshoe strobes in RRS quick-release clamps.

clamps	plates	ballheads	flash	panos	tripods	macro	CRD
• Contact Really Right Stuff •      • Shop Online •      • Download our Catalog •