A quick-release system for your strobes.
FA-QR Quick-Release Set for Strobes
Use this
FA-QR "Quick-Release Set" for fast mounting of your off-camera strobes & strobe cords. Install the bottom piece semi-permanently to the top of your Really Right Stuff flash bracket. This piece will stay on your flash bracket all the time. Then install the top piece to your off-camera strobe cord. Now you can snap fit your strobe cord onto your flash bracket instantly. No more fiddling with slippery thumbwheels!
Purchase extra FA-QR1 top pieces to make all your strobe cords or cold shoes quick-release.
FA-QR Set: top piece connects to strobe cord, bottom piece mounts to RRS flash bracket.
Mount strobe in RRS flash brackets.
FA-CS2 Cold Shoe Mount
This is a cold shoe mount that will allow you to mount hot shoe strobes without using the off-camera TTL strobe cord. Need to mount a second strobe that’s triggered wirelessly to our flash brackets? Just add the
FA-CS2 cold shoe. This cold shoe is insulated, securely holds any hot shoe strobe, and features a ¼"-20 mounting socket on the bottom.
FA-CS2 cold shoe
Mount strobe in RRS clamps.
FA-CS3 Cold Shoe Mount
This is a cold shoe mount that will allow you to mount hot shoe strobes into any Really Right Stuff clamp. Want to use your lightweight tripod as a light stand?
Use the FA-CS3. This cold shoe is insulated, securely holds any hot shoe strobe, and features a ¼"-20 mounting socket on the bottom.
FA-CS3 cold shoe
Add extra Flash Mount and use multiple strobes on any RRS B-Series Flash Bracket.
Spare Flash Mounts for B-Series Flash Brackets
Now a dual strobe set-up is easy! Just add a
spare flash mount to your B-Series flash bracket. Flash mounts are model-specific: B85-FM, B87-QRFM, B91-FM. Image at right shows one Nikon strobe mounted to the flash bracket using the Nikon off-camera strobe cord, and the other strobe is mounted in FA-CS2 cold shoe in spare flash mount.
Spare Flash Mount (model specific)
Two SB-800s shown mounted on B90 dual strobe bar using two FA-CS2 accessory cold shoes.
B90 Dual Strobe Bar
This horizontal bar mounts atop the flash bracket to accommodate parallel mounting of two strobes. Spacing between the strobes is 6.5 inches. Need to trigger them wirelessly? Add a splitter to one Pocket Wizard receiver (use dual headphone adapter, 1/8” mono plug to two 1/8” mono jacks) and wirelessly trigger both strobes simultaneously.
B90
Telescoping extender: 6.1" extended, 3.8" collapsed.
FA-EX1 Telescoping Extender
This is a rigid, but lightweight, telescoping extension column that mounts atop our flash brackets to increase the distance between the strobe head and the lens by an additional 3.8 to 6.14 inches.
Use FA-EX1 to extend your strobe farther forward for interesting backlighting for macro work.
FA-EX1 extenders can be used alone or together with the longer B89 extender.
Rigid extender post, 8.5"
B89 Extender Post
This extension column mounts atop our flash brackets to increase the vertical distance by an additional 8.5 inches. The
B89 extender can eliminate “eyeshine” when using a strobe for flash fill on wildlife. It is also handy to eliminate red eye when shooting nighttime football (remember, the farther away you are from your subject, the greater the extension must be to eliminate red eye).
Flash Extenders extend the possibilities for your strobes!
