TVC-33 Tripod with Full Gimbal Head

This package includes one each TVC-33 Versa tripod, TA-3-LB leveling base, and PG-02 FG Full-Gimbal head. This unique combination delivers a modular, versatile, and robust gimbal setup that can also be used for shooting 360° panoramas (additional clamp needed for pano functionality).

PG-02 FG Full-Gimbal Head

Our PG-02 FG full-gimbal head combines three modular pieces: a Horizontal Base that provides the horizontal panning, a Vertical Arm that provides the vertical panning, and a sliding Cradle Clamp for optimal positioning of large telephotos. The PG-02 delivers precision smooth panning and rock solid lockup for any load. Store components separately for optimal portability when traveling; no tools required for setup or break down.

To assemble, slide the bottom of the Vertical Arm along the dovetail top surface of the Horizontal Base and secure with locking knob (lock inside edge of Vertical Arm at 110mm to laterally center your lens). Slide the Cradle Clamp down the Vertical Arm, lock into place, and load your lens. Our patented adjustable lever-release Cradle Clamp accepts all Arca-Swiss style plates except Arca-Swiss P0 plates and plates made by Novoflex.

When using head to shoot panoramas, remove Cradle Clamp and replace it with one of our sliding clamps (click here to see sliding clamp options). The Vertical Rail doubles as a nodal slide.

TA-3-LB Leveling Base & TVC-33 Versa Tripod

Our TVC-33 tripod with leveling base delivers rock solid support for all gear. At a combined weight of only 4.9 pounds, no other combination can deliver equivalent load capacity at that weight.

Can't decide which Versa tripod is the right one for you? Click through for a comparison of models.

1. SUREGRIP™ APEX LOCK
   Other tripods rely on a split apex to keep your accessories in place, and inherently suffer from a weakened structure and a lock that relies on friction alone. If inadvertently loosened, it is possible for the center platform/column to fall out. We solved this problem with the Really Right Stuff exclusive SureGrip™ Apex Lock system. Our solid aluminum apex has a high strength stainless steel ring that mechanically locks into place with set screws. In the locked position, all set screw heads are flush or slightly below the outside surface of the apex ring. In order for the platform or column to be removed, all three set screws must be loosened sufficiently to allow the SureGrip™ Apex Lock Ring to clear the corresponding channel in the platform/column. This gives the photographer a visual safety indicator. Carry your tripod over your shoulder with complete confidence.

    

2. OFFSET LEG JOINTS
   Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the angle stops and all other structural joints are well supported. Our tripods have offset leg joints to align the apex with both the angle stops and leg walls. This allows loads to be transferred straight through the strongest points of the structure, while providing greatest possible vibration damping. Another benefit is that the tripod is more compact when collapsed.

    

3. RATCHETING ANGLE STOP
   When setting the leg angles, it is important that the angle stop be fully seated into position. On Versa tripods it is simple. Just pull out the stop, raise the leg, and it will automatically engage into place beginning at the highest setting. Pulling the legs back down will ratchet the stop into place at the lower settings. This makes it fast, simple, keeps your fingers safe from pinches, and reassures that your tripod’s leg angles are set properly.

    

4. RUBBER TWIST LOCKS
   Because of the built in anti-rotation of the carbon fiber legs, the twist lock knobs can be rotated independently. The textured semi-hard rubber exterior allows for easy adjustments and outstanding grip with or without gloves.

    

5. TEARDROP RUBBER FEET
   The unique large diameter teardrop shape keeps leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at any angle. The feet may be interchanged with Really Right Stuff Stomping Spikes or Rock Claws to accommodate the toughest terrain. (Accessories sold separately).

    

6. WEIGHT HOOK
   Hanging a weight enhances the stability of your tripod by keeping it firmly anchored to the ground.