The FA-QR1 adapter that comes with each flash bracket fits
most manufacturer's strobe cords. But some cords, strobes, and flash units require an adapter to ensure a non-twist fit. Click on each image to reach the detail page with product specs and images of the item in use.
FA-QR29 adapter
Nikon SC-29 strobe cord
The footprint of the SC-29 strobe cord is broader than the standard SC-28 cord (SC-28 cord does not require an adapter). Use our FA-QR29 adapter for a perfect fit.
FA-QRCS2 Cold Shoe
Cold Shoe Mounts
These insulated cold shoe mounts allow direct mounting of hot shoe strobes without the TTL cord. Choose FA-QRCS2 for direct mounting of hot shoe strobes on a Really Right Stuff flash bracket/flash mount/accessory. Choose FA-QRCS3 for direct mounting of hot shoe strobes in any Really Right Stuff style clamp.
FA-CS3 Cold Shoe
FA-QR-Q2 adapter for T4d/T5d/T5d-R
Quantum® Qflash
The base of these flash units is angled and requires an adapter. Use either FA-Q1 or FA-QR-Q2 adapter.
FA-Q1 adapter for older Qflash units
FA-QR200 adapter
Nikon SB-R200 Speedlights
Use our FA-QR200 adapter to mount your SB-R200 Speedlight Head onto any Really Right Stuff flash bracket instead of using the Nikon SX-1 Attachment Ring (this is the ring that comes with R1 & R1C1 Systems). One key advantage to using our flash brackets rather than the SX-1 ring is the ability to make fore/aft and radial adjustments to the position of the strobes (particularly when used with FA-EX1 extenders).
FB-A adapter
Lens Plates that are not Double-Dovetail
Really Right Stuff flash brackets fit lens plates with double-dovetails. Retrofit Kirk and older RRS lens plates with dovetail adapter (requires 5/8-inch of clearance between plate & lens barrel). Use FB-A600 to boost flash bracket up by 6/10-inch.
FB-A600 adapter