Longer Width Lever-Release Clamp
Install on ball stems with male stud threaded 3/8"-16.
The B2 LLR II has dual mounts: center socket is countersunk on top but also threaded 3/8"-16. Mount by spinning onto an exposed threaded post or with flat head screw from above (accept M6 or 1/4"-20, not 3/8"). These clamps are appropriate for mounting on:
B2 LLR II is 80mm (3.15") long (lever adds add'l 5/8"), one central countersunk 3/8"-16 socket, two 1/4"-20 countersunk sockets 1.8" center-to-center, spirit level, safety stop relief grooves, and centering index marks, 5.9oz/168g
Easy Top-Loading: In one quick action, the clamp can go from fully closed to fully open. No more lost shots while fumbling to feed the plates into the end of the clamp. The lever can be stopped in 3 positions: 1) fully closed; 2) half open; and, 3) fully open. The half-open position allows the camera/lens plate to slide within the clamp for minor positioning adjustment.
Low Profile: Lever does not protrude above or below the profile of the clamp; perfect for low-clearance applications.
Close-Fitting Shape: In the closed position, the lever closely hugs the contours of the clamp. This makes it less of a weed catcher in the field and reduces the chance of being damaged in a fall.
Super-Tough: The Stainless Steel lever delivers a lifetime of wear.
Lever Release Clamp User Manual
©Really Right Stuff. All Rights Reserved.
Mail us at: