This foot replaces the Nikon lens collar foot on the Nikkor 200-400mm VR & VR-11, 300mm/f2.8 VR & VR-II lenses. You can mount your lens in any Really Right Stuff clamp when this replacement foot is installed.

1. To remove the Nikon foot, use the M2.5 hex key tool that comes with the LCF-14 to completely remove the four Nikon mounting screws.
2. To install the LCF-14, use the four original Nikon M3 screws and secure the Really Right Stuff foot to the lens collar.
3. If your mounting screws loosen over time, consider using a drop of LocTite 242 for better security.

Use one of our Long Lens Packages to stabilize your 200-400mm lens and improve your shots. And don't believe just us; read this article by Thom Hogan.

Why Choose a Replacement Foot Instead of a Lens Plate?

A replacement foot with built-in dovetail mounting will be lighter, lower in profile, and provide the best possible stability for your lens.

Specs:

1. Length: 5.0 inches / 127 mm
2. Height: 1.5 inches / 38 mm
3. Weight: 4.2 ounces / 119 g
4. Bottom of foot incorporates two accessory sockets: one ¼"-20 and one 3/8"-16.
5. This item includes one LCF-14 replacment foot, one M2.5 hex key tool, and two M3 safety stop screws.

Flash Bracket:

B87

Our B-Series Flash Brackets mount to the Really Right Stuff lens plate (or replacement foot) on your collared lens. The Nikon AF-S VR (& VR II) 200-400mm/f4G ED-IF, AF-S VR (& VR II) 300mm/f2.8G ED-IF lenses are compatible with our mid-sized B87-QR or B91-QR brackets if you want to place the flash higher over the lens.