This foot replaces the Nikon lens collar foot on AF-S VR and VR-II 70-200mm/f2.8 lenses. You can mount your lens in any Really Right Stuff clamp when this replacement foot is installed.

1. To remove the Nikon foot, unscrew the lock knob, depress the spring-loaded tab, and slide the foot forward.
2. To install the LCF-10, slide it on from front to back until you feel it snap into place, then tighten the lock knob.
3. If your mounting screws loosen over time, consider using a drop of LocTite 242 for better security.

Why Choose a Replacement Foot Instead of a Lens Plate?

A replacement foot with built-in dovetail mounting will be lighter, lower in profile, and provide the best possible stability for your lens.

If your LCF-10 feels loose check the plate mount where the LCF-10 snaps onto the collar. This thin aluminum Nikon plate mount is easily deformed by tripod use. Replace yours with our LCF-10P; see link under Related Items at left.

The LCF-10 is also used with LC-A10 and LC-A11 replacement collars.

Specs:

1. Length: 3.2 inches / 81 mm
2. Height: 1.2 inches / 30 mm
3. Weight: 2.7 ounces / 77 g
4. Bottom of foot incorporates one ¼"-20 accessory socket.
5. This item includes one LCF-10 replacement foot, one M2.5 hex key, and two M3 safety stop screws.

Flash Bracket:

Our B-Series Flash Brackets mount to the Really Right Stuff lens plate (or replacement foot) on your collared lens. The Nikon 70-200mm/f2.8 VR & VR-II lenses are compatible with our smallest B85-B flash bracket. Or choose the larger B87-QR or B91-QR brackets if you want to place the flash higher over the lens.

Our B-Series flash brackets keep your strobe directly over the barrel of the lens even when camera is rotated to vertical. The example below shows our B85-B flash bracket with the Nikkor 70-200mm/f2.8 VR lens. See flash brackets for more information.