1. Height to Cord Mount: 9.75 inches / 248 mm
2. Interior Clearance: 7.0 inches / 178 mm
3. Width: 5.6 inches / 142 mm
4. Weight: 8.3 ounces / 235 g
5. Price: $270
6. Includes: one B91-QR flash bracket and one FA-QR1 adapter

More on RRS Flash Brackets

Part 1: Wedding Pro Flash Bracket

Part 3: Quick Release

The FA-QR1 adapter that comes with each flash bracket fits most manufacturer's strobe cords. But some cords, strobes, and flash units require an adapter to ensure a non-twist fit. Click on each image to reach the detail page with product specs and images of the item in use.

Nikon SC-29 strobe cord

The footprint of the SC-29 strobe cord is broader than the standard SC-28 cord (SC-28 cord does not require an adapter). Use our FA-QR29 adapter for a perfect fit.

Cold Shoe Mounts

These insulated cold shoe mounts allow direct mounting of hot shoe strobes without the TTL cord. Choose FA-QRCS2 for direct mounting of hot shoe strobes on a Really Right Stuff flash bracket/flash mount/accessory. Choose FA-QRCS3 for direct mounting of hot shoe strobes in any Really Right Stuff style clamp.

Quantum® Qflash

The base of these flash units is angled and requires an adapter. Use either FA-Q1 or FA-QR-Q2 adapter.

Nikon SB-R200 Speedlights

Use our FA-QR200 adapter to mount your SB-R200 Speedlight Head onto any Really Right Stuff flash bracket instead of using the Nikon SX-1 Attachment Ring (this is the ring that comes with R1 & R1C1 Systems). One key advantage to using our flash brackets rather than the SX-1 ring is the ability to make fore/aft and radial adjustments to the position of the strobes (particularly when used with FA-EX1 extenders).

Lens Plates that are not Double-Dovetail

Really Right Stuff flash brackets fit lens plates with double-dovetails. Retrofit Kirk and older RRS lens plates with dovetail adapter (requires 5/8-inch of clearance between plate & lens barrel). Use FB-A600 to boost flash bracket up by 6/10-inch.